Semiconductor diode theory is at the very centre of much of today’s electronics industry. In fact semiconductor technology is present in almost every area of modern day technology and as such semiconductor theory is a very important element of electronics.
One of the fundamental structures within semiconductor technology is the PN junction. It is the fundamental building block of semiconductor diodes and transistors and a number of other electronic components.
The semiconductor diode has the valuable property that electrons only flow in one direction across it and as a result it acts as a rectifier. As it has two electrodes it receives its name – diode. In view of this, it is one of the most fundamental structures in semiconductor technology. Vast numbers of diodes are manufactured each year, and of course the semiconductor diode is the basis of many other devices apart from diodes. The bipolar junction transistor, junction FET and many more all rely on the PN junction for their operation. This makes the semiconductor PN junction diode one of the key enablers in today’s electronics technology.
PN Junction
In its basic form a semiconductor diode is formed from a piece of silicon by making one end P type and the other end N type. This means that both ends have different characteristics. One end has an excess of electrons whilst the other has an excess of holes. Where the two areas meet the electrons fill the holes and there are no free holes or electrons. This means that there are no available charge carries in this region. In view of the fact that this area is depleted of charge carriers it is known as the depletion region.
Even though the depletion region is very thin, often only few thousandths of a millimetre, current cannot flow in the normal way. Different effects are noticed dependent upon the way in which the voltage is applied to the junction. If the voltage is applied such that the P type area becomes positive and the N type becomes negative, holes are attracted towards the negative voltage and are assisted to jump across the depletion layer. Similarly electrons move towards the positive voltage and jump the depletion layer. Even though the holes and electrons are moving in opposite directions, they carry opposite charges and as a result they represent a current flow in the same direction.
If the voltage is applied to the semiconductor diode in the opposite sense no current flows. The reason for this is that the holes are attracted towards the negative potential that is applied to the P type region. Similarly the electrons are attracted towards the positive potential which is applied to the N type region. In other words the holes and electrons are attracted away from the junction itself and the depletion region increases in width. Accordingly no current flows.
PN junction characteristics
The PN junction is not an ideal rectifier diode having infinite resistance in the reverse direction and no resistance in the forward direction.
In the forward direction (forward biased) it can be seen that very little current flows until a certain voltage has been reached. This represents the work that is required to enable the charge carriers to cross the depletion layer. This voltage varies from one type of semiconductor to another. For germanium it is around 0.2 or 0.3 volts and for silicon it is about 0.6 volts. In fact it is possible to measure a voltage of about 0.6 volts across most small current diodes when they are forward biased. Power rectifier diodes normally have a larger voltage across them but this is partly due to the fact that there is some resistance in the silicon, and partly due to the fact that higher currents are flowing and they are operating further up the curve.
From the diagram it can be seen that a small amount of current flows in the reverse direction (reverse biased). It has been exaggerated to show it on the diagram, and in normal circumstances it is very much smaller than the forward current. Typically it may be a pico amps or microamps at the most. However it is worse at higher temperatures and it is also found that germanium is not as good as silicon.
This reverse current results from what are called minority carriers. These are a very small number of electrons found in a P type region or holes in an N type region. Early semiconductors has relatively high levels of minority carriers, but now that the manufacture of semiconductor materials is very much better the number of minority carriers is much reduced as are the levels of reverse currents.
Summary
Even though the basic semiconductor diode may appear to have limited applications, it finds uses in a great variety of applications. Specialised versions of the diode are used for particular applications. The light emitting diode (LED) and photodiode are but two examples. However the PN junction is also the basis of the bipolar junction transistor, and the junction FET. There are also many many other examples of its use. As a result many billions of the semiconductor diodes are manufactured each year, and it is the most fundamental structure to today’s semiconductor electronics scene.
